Figure 5-27. Ftir Wiring And Tubing Connections; Figure 5-28. Rubber Mount Nut Removal - Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual

Thermo Fisher Scientific
Figure 5–27. FTIR Wiring and Tubing Connections
13. Using the 7/16-inch wrench, disconnect the 2 nuts and washers from
each of the 4 rubber mounts that hold the FTIR to its base
28).
Figure 5–28. Rubber Mount Nut Removal
14. Using 2 people, carefully lift the FTIR unit off of its base. For details,
see "Lifting" on page 2-1.
15. Re-install the FTIR by following the previous steps in reverse order.
Preventive Maintenance and Servicing
Omni FTIR Multi Gas CEMS Instruction Manual
Removing the FTIR
(Figure 5–
5-37