Table of Contents
Advertisement
IMACC Script Setting
Modbus Control Version
Modbus Control
E-10
Omni FTIR Multi Gas CEMS Instruction Manual
There are six subpanels included in this script block. Each of them is the
solenoid valve operation setting. From the top to the bottom, the valve
operation is sequentially implemented. Alternatively, the blowback valve is
first triggered to open for five seconds and then closed for 10 seconds. The
same procedure is repeated for two more times before switching back to the
normal sample mode setting.
Script Setting for Modbus Version Script
●
Version
For the Modbus version script, all commands are set or sent by users via
PLC or an other GUI. The system reads the command and transfers it into
the script using Modbus protocol. The list of the commands and their
description is given in
The Modbus based script named Modbus_control is saved in the script
folder of the directory of c:\scripts. Use script edit to open it so that its
setting block pops up.
Table B–3
in Appendix B
"Modbus
Protocol".
Thermo Fisher Scientific
Advertisement
Table of Contents
