3.2
Cyclic Transmission
This function communicates data periodically among stations on the network using link devices.
• The link devices can be assigned in "Network Configuration Settings" under "Basic Settings". (Page 108 "CC-Link IE
TSN Configuration" Window)
• The link refresh is assigned in "Refresh Settings" under "Basic Settings". (Page 101 Refresh settings)
Cyclic transmission operates as follows with the communication mode set by the module parameter of the master station.
The communication mode of the Motion module is fixed to the unicast mode.
Communication mode
Description
Unicast mode
Cyclic data is sent to one station.
3 FUNCTIONS
25
3.2 Cyclic Transmission
3