Advanced: Lamp History Menu - Christie CP2000-M User Manual

• Light: This is a meter reading from the projector's light sensor. It indicates the current light output (vertical
bar) and LiteLOC™ level set (red horizontal line). The value at the top of the meter is shown in arbitrary
units-of-measure and does not represent actual lumens or fL.
• Lamp (Read Only): Indicates the current lamp age (hours), amps (amps), voltage (volts), footlamberts (fL)
and watts (lamp power).
• LampLOC: Use the arrow keys to move the motors that reposition the bulb in the projector for optimized
light output. Use either the Do Auto button (recommended) or the individual buttons. NOTES: 1) Lamp
must be ON to begin. If it is turned OFF during a re-positioning, the bulb returns to its former position. 2)
Douser opens and remains non-functional during a LampLOC ™ adjustment.

Advanced: Lamp History Menu

The Advanced: Lamp History menu displays the last 8 recorded lamp serial numbers, along with the entry
date and the number of hours logged. This is a read-only menu unless activated via the New Lamp button,
which adds editing boxes and a Save button for recording lamp type, serial number and the number of hours
already logged on the lamp, if any. IMPORTANT! Ensure the projector is in FULL POWER mode when
adding a new lamp in Lamp History. If done in STAND-BY mode lamp information may be lost.
A
New Lamp: Activates Lamp History menu & text
editing box for recording a new lamp's serial num-
ber, which resets lamp timer
B Acknowledge Lamp Rotation: Confirm lamp rota-
tion & clear the alarm condition (if enabled)
C Hours: Enter # of hours logged on newly installed
lamp. If never used value remains 0
D Save: Press to record serial number, date & auto-
matically reset lamp timer to value entered in
Hours field
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
Figure 3-28 Advanced: Lamp History Menu
E
F
G
Read Only Window: Displays information of the last 8
recorded lamps
Serial Number: Enter installed lamps serial number
Lamp Type
Section 3: Operation
3-39