6.7.12 Display is "Noisy"
1. Display adjustment at the input source may be required. Adjust pixel tracking, phase and filter. Noise is
particularly common on YPbPr signals from a DVD player.
2. Ensure the video input is terminated (75 S). If it is the last connection in a loop-through chain, the video
input should be terminated at the last source input only.
3. The input signal and/or signal cables carrying the input signal may be of poor quality.
4. If the distance between the input source device and the projector is greater than 25 feet, signal amplifica-
tion/conditioning may be required.
5. If the source is a VCR or off-air broadcast, detail may be set too high.
6.7.13 Random Streaks on Bottom of the Image
If a 24Hz or 25Hz HD-SDI signal or a 50Hz SDI digital PAL signal is used ensure non-cinema processing is
selected. This can be implemented via the web user interface, Channel: Page 1 menu by disabling the Cinema
checkbox. NOTE: Password-protected.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
Section 6: Troubleshooting
6-7