Navigating The Cdp Menus; Navigation Icons - Christie CP2000-M User Manual

Section 3: Operation

3.4.2 Navigating the CDP Menus

Most basic controls of the projector are accessed from within the
projector's menu system. There are several groups of related functions,
with each group selectable as a menu item in the Main menu (Figure 3-4).
Press at any time to display the Main menu. With the Main menu
MENU
displayed, use the arrow keys to highlight the desired option, then press
to make the selection. The corresponding function menu or pull-
ENTER
down list containing further options will appear.
Extra long menus are indicated by a small arrow in the bottom right corner
of the display. To scroll through a list of items, use the down arrow key.
Once past the 4 line limit of the display, another arrow appears in the
upper-left corner to allow scrolling of the menu in both directions. Press
once to return to the previous level of options.
EXIT

Navigation Icons

Additional menu items available, press ENTER to view.
Menu option is enabled (ON).
Menu option is disabled (OFF).
Various status icons are used in the CDP display to convey projector status. With the exception of the status
icon, all other CDP icons appear on the display as the functions are enabled or disabled.
Status Icon
This icon always appears in the upper-right hand corner of the CDP display to indicate the communication
status of the projector. When flashing, active communication is taking place. When solid, it can mean
communication is temporarily stalled (i.e., too many keypresses entered at 1 time) or communication with the
projector has failed.
Service Icon
This icon appears on the CDP display whenever the following functions are ON: Lamp Change, Lamp
Rotation or Filter Change. NOTE: By default, lamp rotation is disabled.
Power Icon
This icon appears on the CDP display when power to the projector is in POWER ON mode (not in
STANDBY).
Error Icon
This icon appears on the CDP display whenever a critical error occurs.
Lamp ON Icon
This icon appears on the CDP display when the lamp is ON.
3-8
Figure 3-4 Main Menu
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)