Setup - Christie CP2000-M User Manual

Appendix A: Serial API
Table A.1 Function Codes
EXAMPLES:
(TCG+C108 "Altanis") Use file "Altanis" on channel 108
(TCG+C108? ) get target color file name on channel 108
(TCG?L) list all available entries of target color control
(TCG+TEMP "Altanis") Use file "Altanis" as DLP active file
3D Enable (TDC)
DESCRIPTION
Enable/Disable 3D on the specified channel. This controls the frame rate multiplication features that allow for simulated three
dimensional image projection.
SUBCODE
Cxxx
None
EXAMPLES:
(TDC+C108 1) Enable 3D on channel 108
(TDC+C108?) get 3D setting on channel 108
(TDC?) get current 3D status
Display Reference GPI (TDI)
DESCRIPTION
Setup Display Reference GPI for 3D control. This signal selects the input signal that will be used as a reference to synchronize
multiple projectors so that the gating technology so that the images can be targeted to the correct eyes.
SUBCODE
Cxxx
None
EXAMPLES:
(TDI?L) list all entries on Display Reference GPI control
(TDI+C101 1) set Display Reference GPI to 1 on channel 101
(TDI+C101?) get Display Reference GPI on channel 101
3D Dark Time (TDK)
DESCRIPTION
Setup Dark Time for 3D control. This controls how much time between displayed images the output remains dark to allow for
the glasses on other gating mechanism to flip between the eyes.
SUBCODE
Cxxx
None
EXAMPLES:
(TDK+C101 1) set Dark Time to 1 on channel 101
(TDK+C101?) get Dark Time on channel 101
Output Reference Delay (TDP)
DESCRIPTION
Setup Output Reference Delay phase for 3D control. Additional control for output timing relative to input timing.
A-22
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select 3D enable for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select display GPI for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select dark time for the current channel.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)