Using The Control Display Panel (Cdp); Cdp Key Descriptions - Christie CP2000-M User Manual
Hide thumbs
Also See for CP2000-M:
- Service booklet (122 pages) ,
- Setup manual (74 pages) ,
- Instruction sheet (5 pages)
Table of Contents
Advertisement
Section 3: Operation
3.4
Using the Control Display Panel (CDP)
The CDP provides fast and easy local operation and monitoring of various projector functions. It is located on
the back panel of the projector. For convenience it can be removed and installed in an alternate location in the
projection room. NOTES: 1) DO NOT use the CDP as a handheld remote. It is designed for fixed installations
only. 2) An optional 25ft extension cable kit (Christie P/N: 108-283101-xx) is available to allow installation of
the CDP in another location.
For a complete breakdown of the CDP menu structure, refer to
CDP is the primary interface with the projector. For more sophisticated setup and diagnostic controls, refer to
3.5 Using the Web User Interface, on page
3.4.1 CDP Key Descriptions
3-6
3-15.
Figure 3-3 CDP Key Descriptions
Section 4 CDP Menu
Tree. In most cases, the
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
Advertisement
Table of Contents
