6.3
ILS
6.3.1 Resetting the ILS
The ILS must be reset when:
• the lens has been physically bumped or moved
• manual adjustments have been made to zoom or focus
• a power outage or brown-out occurred during a channel change
1. To reset the ILS select Lens Control>Lens Reset from the CDP. From the Lens Reset menu select All
Axes or do each axes individually. NOTE: Both the ILS and Reset on Startup options must be turned ON
for the Lens Reset feature to work.
Or:
2. Access the Advanced>Lens menu, via the web user interface. Select Lens Reset.
For more information, refer to
40.
6.3.2 Calibrating the ILS
The ILS must be calibrated when:
• a new lens has been installed
• the lens mount has been replaced
• ILS settings are drifting within a short period of time
1. To calibrate the ILS select Lens>Lens Calibration from the CDP. From the Lens Calibration menu
select All Axes or do each axes individually.
Or:
2. Access the Advanced>Lens menu, via the web UI. Select Calibrate.
For more information, refer to
40.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
3.4.5 Lens Control Menu, on page 3-12
3.4.5 Lens Control Menu, on page 3-12
Section 6: Troubleshooting
and
Advanced: Lens Menu, on page 3-
and
Advanced: Lens Menu, on page 3-
6-3