Advanced Setup: Lamp History Window - Christie Solaria CP2220 User Manual

Advanced Setup: Lamp History Window

The Advanced Setup: Lamp History window displays a read-only list of the previous and current lamps used
by the projector. Once a lamp has been added, it can not be removed. When adding a new lamp, a separate
dialog displays with editing boxes to record the new lamp type, serial number and the number of hours already
logged on the lamp, if any. Important! Ensure the projector is in full power ON mode when adding a new
lamp. If done in stand-by mode, lamp information may be lost.
Table 3.18 Advanced Setup: Lamp History Window
Control
Date
Lamp Type
Serial Number
Hours
Expiry Hours
Rotated
Reason
Add Lamp
Acknowledge
Lamp Rotation
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Figure 3-21 Advanced Setup: Lamp History Window
Description
The date the lamp was installed. NOTE: Ensure TPC date and time are correctly set to automatically
record the lamp change date properly.
The lamp type.
The lamp serial number.
The number of hours logged on the lamp.
The recorded number of hours the lamp will expire.
States if the lamp has been rotated or not.
The reason for changing the lamp.
Click the Add Lamp button to launch the Add Lamp window. See
Click to acknowledges when a lamp has been rotated.
Section 3: Operation
Add Lamp Window, on page 3-32.
3-31