Christie CP2000-M User Manual page 157

Table A.1 Function Codes
EXAMPLES:
(SRF+C108 "XXX") Use file "XXX" on channel 108
(SRF+C108?) get source file name on channel 108
(SRF?L) list all entries of source control
System Status (SST)
DESCRIPTION
Retrieve the various system status groups.
SUBCODE
ALRM
CONF
COOL
HLTH
INTE
LAMP
None
PERI
SIGN
SYST
TEMP
VERS
EXAMPLES:
(SST+ALRM?) returns (SST+ALRM!000 002 "101" "Prism temperature")
Where parameters are P1=index number, P2=error level, P3=value, P4=description.
Error level is 0=no errors or warnings, 1=warning, 2=error, 3=error and warning
Target Color Gamut (TCG)
DESCRIPTION
Set the Target Color Gamut file. This file describes desired output colorimetry from the projector. For this control to function
the Measured Color Gamut Data must be accurate.
SUBCODE
Cxxx
None
Temp
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
DESCRIPTION OF USE
Returns a summary of any active alarms.
Returns configuration data - model, sn, fans, air flow, etc.
Returns cooling data - cooling fans, air flow, etc.
Returns system health.
Returns interlock data.
Returns LAMP operational data.
Returns information on all status groups, with one message per item.
Returns peripherals data - Cine-IMP.etc.
Returns signal data - freq, etc.
Returns system data - power, hours of use, shutter open, etc.
Returns temperature data.
Returns version numbers.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select target color gamut for the current channel.
Select target color file as DLP active file, do not change channel settings.
Appendix A: Serial API
A-21