Christie CP2000-M User Manual page 161

Table A.1 Function Codes
EXAMPLES:
(TMD+ZONE 20) Set time zone to EST
(TMD+TIME "17:50:45") Set new local time
(TMD+DATE "2007/02/30") Set the local date.
(TMD+TIME?) Get local time (TMD+TIME! 17:50:45)
Output Reference GPO (TOO)
DESCRIPTION
Setup Display Reference GPO for 3D control. This signal selects the output signal that will be used as a reference to the gating
technology so that the images can be targeted to the correct eyes.
SUBCODE
Cxxx
None
EXAMPLES:
(TOO?L) list all entries on Output Reference GPO control
(TOO+C101 1) set Output Reference GPO to 1 on channel 101
(TOO+C101?) get Output Reference GPO on channel 101
Output Reference Polarity (TOP)
DESCRIPTION
Setup Output timing signal reference polarity for 3D control
SUBCODE
Cxxx
None
EXAMPLES:
(TOP?L) list all on Output Reference Polarity control
(TOP+C101 1) set Output Reference Polarity to 1 on channel 101
(TOP+C101? get Output Reference Polarity on channel 101
User ID login (UID)
DESCRIPTION
Log the username in with a password or query the current logged in level.
SUBCODE
None
None
EXAMPLES:
Request the log in level (UID?). Response is (UID! "username" xx) where xx is the user level
User levels are: status ( 1 ), Operator ( 2 ), Operator advanced ( 3 ), Advanced ( 4 ), Admin ( 5 ), Service ( 6 )
(UID) "username" "password") Login a user
(UID) Logout the current user, also happens automatically when a new user logs in
(UID?)(UID! "username" 01) Display the current logged in user and their access level
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select GPO for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select output reference polarity for the current channel.
DESCRIPTION OF USE
Log in user (UID "username" password").
None
Appendix A: Serial API
A-25