Christie CP2000-M User Manual page 140

Appendix A: Serial API
Table A.1 Function Codes
EXAMPLES:
(CHA?) get current active channel
(CHA 108) set channel 108 as active channel
Channel Icon (CHI)
DESCRIPTION
Set icon file name and path for the specified channel. This selects the icon to be displayed on web UI for the channel button.
SUBCODE
Cxxx
None
EXAMPLES:
(CHI+C108 "/etc/data/icons/ch108.ico") use ch 108.ico for channel 108
(CHI+C108 ?) get icon file name and path for channel 108
Color Space (CSP)
DESCRIPTION
Color space control, color space file will be set when PCF in Use (PIU) is off. This control describes the source colorimetry
information. Can use index or text string to set control.
SUBCODE
Cxxx
None
EXAMPLES:
(CSP+C108 "RGB Unity") Use file "RGB Unity" on channel 108
(CSP+C108?) get color space file name on channel 108
(CSP?L) list all entries of color space control
Defaults (DEF)
DESCRIPTION
This control will reset all preference and configuration settings in the device to their default values. The value of 111 must be
sent with each of the sub codes as well as the default. The number 111 helps prevent accidental use of this control.
SUBCODE
CHAN
CONF
OPTN
PREF
UNSV
USER
A-4
DESCRIPTION OF USE
Replace xxx with the channel number.Valid Range is 101 - 164.
Select icon for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select color space for the current channel.
DESCRIPTION OF USE
Restore default channels. 0 defaults all.
Set configuration controls to default.
Set all option card controls to default.
Set preference controls to default.
Set unsaved controls to default.
Clears all users and restores the factory default user. Most UI's will
require you to log in again after issuing this command.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)