Christie CP2000-M User Manual page 145

Table A.1 Function Codes
EXAMPLES:
(LCT+C108 "Linear_9x9x9") Set LUT CLUT file name to "Linear_9x9x9" on channel 108
(LCT+C108?) get LUT-CULT file name on channel 108
(LCT?L) list all entries of LUT-CLUT control
Lens Type (LEN)
DESCRIPTION
Define model and serial number for primary installed lens and auxiliary lens.
SUBCODE
(AMOD)
(ASER)
(MMOD)
(MSER)
None
EXAMPLES:
(LEN+MMOD?L) list supported lens model
(LEN+MMOD 1 set lens model
(LEN+MSER "xxxx") set lens serial number
Lens Horizontal Position Adjustment (LHO)
DESCRIPTION
Adjust lens to specific horizontal position.
SUBCODE
Cxxx
None
EXAMPLES:
(LHO 500) Move lens mount to position 500 at horizontal axis
(LHO+C101 500) Set lens mount to position of channel 101 to 500 at horizontal axis
Lamp ID (LID)
DESCRIPTION
Set or get lamp type (ID) for the currently installed lamp. Supports read back of the list of supported lamp types.
SUBCODE
None
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
DESCRIPTION OF USE
Auxiliary lens model.
Auxiliary lens serial number.
Main lens model.
Main lens serial number.
Not available.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101-164.
Moving lens mount to a specified horizontal position. Default data range -
2000 to 2000.
DESCRIPTION OF USE
Set Lamp ID for current lamp.
Appendix A: Serial API
A-9