Channel Menu - Christie CP2000-M User Manual
Hide thumbs
Also See for CP2000-M:
- Service booklet (122 pages) ,
- Setup manual (74 pages) ,
- Instruction sheet (5 pages)
Table of Contents
Advertisement
Section 3: Operation
3.4.3 Channel Menu
Use the arrow keys to scroll through a list of available channels. Once the desired channel is displayed, press
. To further edit a channel, select Edit Channel to activate another menu (Figure 3-5), which provides
ENTER
the options to tailor projector processing for any type of incoming source, including 3D material and collect
these settings into a unique channel that any user can select using the CDP or the web user interface Main
menu. Up to 64 channels can be defined. NOTE: Only selected "active" channels can be edited though the
CDP. Refer to
3.5.7 Channel Menu, on page 3-29
the web user interface.
3-10
for a general description of the same controls accessible from
Figure 3-5 Edit Channel
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
Advertisement
Table of Contents
