Christie CP2000-M User Manual page 138

Appendix A: Serial API
Table A.1 Function Codes
EXAMPLES:
(AML?) get the current status of auxiliary lens
(AML+C108 1) Use auxiliary lens on channel 108
(AML+C108?) Query auxiliary lens setting for channel 108
(AML+C108!001) response form previous query
(AML+INST 1) set flag for using MALM, otherwise MALM is ignored
(AML+LENI 1000) move lens to step 1000 for lens in position
(AML+LENO 7000) move lens to step 1000 for lens out position
(AML+POSI ?) query where the lens is
(AML+CSTA ?) query how much percent the MALM calibration is running
BACKUP (BAK)
DESCRIPTION
This control backs up various parts of the system. Files are zipped, date/time stamped and placed in the /var/www/backup
directory.
SUBCODE
CFIL
CHAN
CONF
HFIL
IFIL
INTR
ISTA
ITST
PFIL
PREF
UFIL
USER
A-2
DESCRIPTION OF USE
Retrieve the name of the last sucessful configuration backup. Read only
sub code.
Meaningless value. Simply used to trigger. Use 1.
Meaningless value. Simply used to trigger. Use 1.
Retrieve the name of the last sucessful channel file.
Retrieve the name of the last sucessful interrogator file.
A value of 0 will launch the interrogator in normal mode. This 
collects the common logs in the system. A value of 1 will launch the
interrogator in enhanced mode. Enhanced mode offers additional debug
info as well as provides the normal info.
Retrieve the current state of the interrogator. 0 means not running.
Read only (0-100), retrieve the progress percentage of interrogator
Retrieve the name of the last sucessful preference backup. Read only sub
code.
Meaningless value. Simply used to trigger. Use 1.
Retrieve the name of the last sucessful user backup. Read only sub code.
Meaningless value. Simply used to trigger. Use 1.
.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)