Christie CP2000-M User Manual page 142

Appendix A: Serial API
Table A.1 Function Codes
None
TEMP
EXAMPLES:
(EME 1) enable broadcasting error messages
(EME+FANF 0) disable fan fail alarm warnings
(EME?) requests current state of broadcast. Example response is (EME!001)
Focus Lens Position Adjustment (FCS)
DESCRIPTION
Adjust focus lens to specific position.
SUBCODE
None
EXAMPLES:
(FCS 500) Move focus lens to position 500
(FCS+C101 300) Set the focus position on Channel 101 to 300
Gamma Control (GAM)
DESCRIPTION
Gamma control, gamma file will be set when PCF in Use (PIU) is OFF. This control describes the gamma response curve for
the source signal.
SUBCODE
Cxxx
None
EXAMPLES:
(GAM+C108 "gamma 2.6") Use file "gamma 2.6" on channel 108
(GAM+C108?) get gamma file name on channel 108
(GAM?L) list all entries of gamma control
ILS Config (ILS)
DESCRIPTION
Enable/disable the Intelligent Lens System in specified channel.
SUBCODE
Cxxx
None
EXAMPLES:
(ILS+C101 1) Enable ILS at Channel 101 
(ILS+C101 0) Disable ILS at channel 101
A-6
0 - disable broadcast; 1 - enable broadcast of error messages to all con-
nected serial ports and telnet sessions.
0 - No Over Temperature warning will be generated; 1 - Over Temperature
will be generated.
DESCRIPTION OF USE
Moving focus motor to a specified position. Default data range 1040 to
1040, by using pre-calibration feature it might be changed to be an actual
value.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select gamma for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select ILS for current channel.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)