Christie CP2000-M User Manual page 156

Appendix A: Serial API
Table A.1 Function Codes
EXAMPLES:
(SIN?) Get current input port
(SIN?L) Show entries on the list
(SIN 1) or (SIN "292-B") Set current input port to 292-B
(SIN+C101 ?) Get input port on channel 101
(SIN+C101 1) or (SIN+C101 "292-B") Set input on channel 101
SNMP Agent Configuration (SNM)
DESCRIPTION
This control will set the various configuration options for SNMP Agent.
SUBCODE
LEXT
LHLT
TSIP
ENVT
EXAMPLES:
(SNM+LHLT 1) - Setting this flag to 1 will disable any future lamp half life traps. 
(SNM+LEXT 1) - Setting this flag to 1 will disable any future lamp expire traps.
(SNM+TSIP "xxx.xxx.xxx.xxx") Sets the Trap IP address to xxx.xxx.xxx.xxx.
(SNM+LEXT 1) - Setting this flag to 1 will disable any future lamp expire traps. 
(SNM+ENVT ?) - Get the flag to see if V2 is enabled (1) or disabled (0).
(SNM+ENVT 1) - Enable SNMP V2. 
(SNM+ENVT 0) - Disable SNMP V2.
Screen Orientation (SOR)
DESCRIPTION
Set screen orientation. This allows for flipping the screen orientation to allow for various mounting options of the projector
including the use of mirrors and front or rear screen projection.
SUBCODE
None
EXAMPLES:
(SOR?L) list orientation options
(SOR?) get the orientation status
(SOR0) set orientation to front
Select Source Format (SRF)
DESCRIPTION
Select the Source format file.
SUBCODE
Cxxx
None
A-20
DESCRIPTION OF USE
Gets/Sets the Lamp Expire Trap Flag for the SNMP Agent.
Gets/Sets the Lamp Half Life Trap Flag for the SNMP Agent.
Sets the Trap IP address for the SNMP agent.
Enable SNMP V2.
DESCRIPTION OF USE
Select Orientation. 0 - Normal Front, 1 - Inverted Rear, 2 - Normal Rear,
3- Inverted Front
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select source format for the current channel.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)