Advertisement
P.44
6.5 DIP Switch setting display
Key functions will be as follows on the setting display.
START
STOP
RESET
BZ.OFF
▲
▼
ENTER
DIP Switch-A
ＯＮ
A*
ＯFF
DIP Switch-C
ＯＮ
C*
ＯFF
[NOTE] Duration of pump operation, dip switches, except A-3 (BUZZER) and
B-8 (LCD initialize), can not be used for parameter setting.
PM10U
Fig 6.4 LCD controller
:
Invalid
This stops pump operation.
This resets trip and alarm.
This switches the dip switch numbers.
This sets the selected dip switch ON.
This sets the selected dip switch OFF.
Move display level. Or indicate set up conditions.
* indicate the dip switch number (1 to 8) currently you are setting.
Fig 6.5 DIP Switch
DIP Switch-B
ＯＮ
B*
ＯFF
EBARA
CORPORATION
Advertisement
Troubleshooting
