Dip Switch Setting Display - EBARA ESA25-D Instruction Manual

P.44

6.5 DIP Switch setting display

Key functions will be as follows on the setting display.
START
STOP
RESET
BZ.OFF
▲
▼
ENTER
DIP Switch-A
ＯＮ
Ａ＊
Ｏ FF
[NOTE] Duration of pump operation, dip switches, except A-3 (BUZZER),
can not be used for parameter setting.
PM10U
Fig 6.4 LCD controller
: Invalid
This stops pump operation.
This resets trip and alarm.
This switches the dip switch numbers.
This sets the selected dip switch ON.
This sets the selected dip switch OFF.
This indicates the next page of the display.
* indicate the dip switch number (1 to 8) currently you are setting.
Fig 6.5 DIP Switch
DIP Switch-B
ＯＮ
Ｂ＊
Ｏ FF
EBARA
CORPORATION