3.2.2 Operation Status Control
The sensor data are displayed on the LCD display provided on the controller to
facilitate operation status control and daily inspection.
All WARNING and ALARM signals are displayed on the LCD display. For remote
operation and monitoring, the signals are available as individual and group
outputs.
3.3 The way of pump moving
3.3.1 Preparation
Before pump moving, all adjuster feet shall be raised fully at four places.
In case of being not raised fully, pump may be tripped over by obstacle on floor.
3.3.2 Moving method
Move pump slowly by pushing eye bolt toward direction A. Be sure not to be
caught by toes. If pump needs to be moved toward direction B in order to be set
at a corner or narrow spaces, two persons shall move the pump by pushing its
terminal portion alternately as directed below.
If pump needs to be moved on steps or ditches, spread steel plate or the like
which can sustain the pump weight over the steps / ditches and pump shall be
moved on it by two persons with care.
PM10U
B
A
fully
raised
Adjuster
Caster
P.5
EBARA
CORPORATION