Dip Switch Setting Display - EBARA ESA300W Instruction Manual

6.5 DIP Switch setting display

Key functions will be as follows on the setting display.
START : Invalid
STOP This stops pump operation.
RESET This resets trip and alarm.
BZ.OFF This switches the dip switch numbers.
▲ This sets the selected dip switch ON.
▼ This sets the selected dip switch OFF.
ENTER This indicates the next page of the display.
DIP Switch-A
ＯＮ
Ａ＊
ＯFF
* indicate the dip switch number (1 to 8) currently you are setting.
[NOTE] Duration of pump operation, dip switches, except A-3 (BUZZER),
can not be used for parameter setting.
Fig 6.4 LCD controller
DIP Switch-B
Ｂ＊
Fig 6.5 DIP Switch
(48)
ＯＮ
ＯFF
EBARA
CORPORATION