Dip Switch Setting Display - EBARA EV-S20 Instruction Manual

5.5 DIP Switch setting display

Key functions will be as follows on the setting display.
START
STOP
RESET
BZ.OFF
▲
▼
ENTER
DIP Switch-A
ON
A＊
OFF
[NOTE] Duration of pump operation, dip switches, except A-3 (BUZZER) and B-8
PM10U
Fig 5.4 LCD controller
: Invalid
This stops pump operation.
This resets warning and alarm.
This switches the dip switch numbers.
This sets the selected dip switch ON.
This sets the selected dip switch OFF.
Move display level. Or indicate set up conditions.
* indicates the dip switch number (1 to 8) currently you are setting.
Fig 5.5 DIP Switch
(Initializes the LCD screen), can not be used for parameter setting.
DIP Switch-B
ON
B＊
OFF
P.70
EBARA
CORPORATION