P.40
6.5 Dip Switch setting display
Key functions will be as follows on the setting display.
START
STOP
RESET
BZ.OFF
▲
▼
ENTER
DIP Switch-A
ON
A*
OFF
DIP Switch-C
ON
C*
OFF
[NOTE] Duration of pump operation, dip switches, except A-3 (BUZZER) and
B-8 (LCD initialize), can not be used for parameter setting.
PM10U
Fig 6.4 LCD controller
:
Invalid
This stops pump operation.
This resets trip and alarm.
This switches the dip switch numbers.
This sets the selected dip switch ON.
This sets the selected dip switch OFF.
This indicates the next page of the display.
* indicate the dip switch number (1 to 8) currently you are setting.
Fig 6.5 DIP Switch
DIP Switch-B
ON
B*
OFF
EBARA
CORPORATION