Setup And Operation; Control And Functions; Display; Ego 2 - EBARA Ego 2 Tech Series Operating And Maintenance Manual

Circulating pumps

Table of Contents

Available languages

SETUP AND OPERATION

The pump can be controlled through a display panel and a button on it. The

display shows current pump mode, values and status (working/error).

5.1.1

There are two different display panels, basic and advanced. Pump curves and

modes can be changed with a press of a button. If a pump curve is available,

then the pump curve and mode symbols will be lit. In case that there is no pump

curve available, then only the symbol for pump mode will be lit.

5.1.1.1

Pumps have 3 preconfigured curves of proportional pressure, constant pressure,

and fixed speed modes. The lit symbol represents the selected mode and curve.

Proportional pressure

Default view

Pump modes

Constant pressure

Curve della pompa

Third curve (orange)

Second curve (green)

First curve (blue)

Constant speed

Table of Contents

Table of Contents