6.3.8 Setting the rotational speed in the SAVE ENERGY mode (S.ENERGY)
SET
S.ENERGY SPEED?
△
△ : Increase the setting speed by 0.1 kmin
▽ : Decrease the setting speed by 0.1 kmin
Upper limit MP, BP : The value lower than the set value for the rated speed
Lower limit MP : 1.0 kmin
6.3.9 Setting the WARNING value for the back pressure (option)
SET ALARM SP
BACK PRES.?
△ ▽
: Increase the setting value by 0.5 kPa.
△
: Decrease the setting value by 0.5 kPa.
▽
Upper limit : 30.0 kPa
Lower limit : 5.0 kPa
Factory setting : 20.0 kPa
WARNING reset value : Set value –2.0 kPa
PM10U
PRG.
SET MP
ENTER
S.ENERGY SPEED?
△
▽
SET BP
S.ENERGY SPEED?
PRG.
Use the up and down arrow keys to change the setting value.
▽
-1
PRG.
ENTER
Use the up and down arrow keys to change the setting value.
PRG.
S.ENERGY SPEED
ENTER
MP #.# kmin
S.ENERGY SPEED
ENTER
BP #.# kmin
PRG.
-1
.
-1
-1
, BP : 1.0 kmin
BACK PRES.SP
##.# kPa
Use the keys, " △ " and " ▽ " to set.
ENTER
-1
Use the keys, "△" and "▽" to set.
ENTER
-1
Use the keys, "△" and "▽" to set.
Setting
ENTER
done
EBARA
CORPORATION
P.39
Setting
done
Setting
done