Setting The Pump Operation Control Mode - EBARA ESA200W Instruction Manual

BP: ##.# A
MP: ##.# A
PRG.
Press the key
for 3 sec.
or more.
SET
CONTROL MODE?
SET
DIP SW?
SET
RUNNING MODE?
SET BP
NORMAL SPEED？
SET BP
LOW SPEED?
SET POINT
PUMP
SET POINT
BACK PRESSURE?
SET
VALVE CONTROL?
PM10U
• Status display

• Setting the pump operation control mode

△
▽
• Setting the DIP switch
△
▽
• Setting the pump running mode
△
▽
• Setting the BP Normal rotational speed
△
▽
• Setting the rotational speed in the LOW SPEED mode
△
▽
Setting the pump N2 flow low warning threshold
•
N2
△
▽
Setting the Back Pressure high warning threshold
•
(option)
△
▽
Pump Valve Control (option)
•
Fig. 6.3 How to set the operational mode
Pressing the key PRG. for 3 sec. or more
when the status screen is displayed switches
to the operational mode setting screen.
When the mode you want to
set is displayed, press the
ENTER to go to the setting
change screen.
P.35
EBARA
CORPORATION