Setting The Pump Running Mode; Setting The Bp Normal Rotational Speed; Setting The Rotational Speed In The Low Speed Mode - EBARA ESA200W Instruction Manual

6.3.3 Setting the pump running mode

A case of display if Normal mode selected.
SET
RUNNING MODE?
S.ENERGY MODE : Enables the energy-saving operation
NORMAL MODE : Enables the rated operation.
The mode that is currently not set is displayed.
If you do not need to set, press PRG. key to go back to the previous screen.

6.3.4 Setting the BP normal rotational speed

SET BP
NORMAL SPEED?
△ ▽
△ : Increase the setting speed by 0.1 kmin
▽ : Decrease the setting speed by 0.1 kmin
Upper limit BP : 5.0 kmin
Lower limit BP : 3.0 kmin

6.3.5 Setting the rotational speed in the LOW SPEED mode

SET BP
LOW SPEED?
△ ▽
△ : Increase the setting speed by 0.1 kmin
▽ : Decrease the setting speed by 0.1 kmin
Upper limit BP : The value lower than the set value for the normal speed
Lower limit BP : 1.0 kmin
PM10U
PRG.
ENTER S.ENERGY MODE?
BP NORMAL SPEED
ENTER
#．# kmin
PRG.
:Use the up and down arrow keys to change the setting value.
-1
-1
BP LOW SPEED
ENTER
#．# kmin
PRG.
Use the up and down arrow keys to change the setting value.
-1
-1
Use the keys, "△" and "▽" to set.
-1
.
-1
-1
Use the keys, "△" and "▽" to set.
-1
.
-1
Setting
ENTER
Completed
ENTER
Setting Completed
ENTER
Setting Completed
EBARA
CORPORATION
P.37