Igmp Snooping Commands - D-Link DGS-1510 Series Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide

33. IGMP Snooping Commands

33-1 clear ip igmp snooping statistics
This command is used to clear the IGMP snooping related statistics.
clear ip igmp snooping statistics {all | vlan VLAN-ID | interface INTERFACE-ID}
Parameters
all
vlan VLAN-ID
interface INTERFACE-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the IGMP snooping related statistics.
Example
This example shows how to clear all IGMP Snooping statistics.
Switch# clear ip igmp snooping statistics all
Switch#
33-2 ip igmp snooping
This command is used to enable the IGMP snooping function on the Switch. Use the no form of this
command to disable the IGMP snooping function.
ip igmp snooping
no ip igmp snooping
Parameters
None.
Default
IGMP snooping is disabled on all VLAN interfaces.
The IGMP snooping global state is disabled by default.
Command Mode
Interface Configuration Mode.
Global Configuration Mode.
Specifies to clear IP IGMP snooping statistics for all VLANs and all
ports.
Specifies a VLAN to clear the IP IGMP snooping statistics.
Specifies a port to clear the IP IGMP snooping statistics.
279