Mitsubishi Eclipse 1990 Service Manual page 671

REMOVAL AND INSTALLATION
4.9
3.6
Removal steps
1. Accelerator cable connection
2. Air hose
Engine (Turbo)>
3. Air intake hose
4. TPS connector
5. motor connector
6. Vacuum hose connection
E N G I N E
AND ENGINE>
Engine (Turbo)>
2
Engine>
INSTALLATION SERVICE POINT
Install the throttle body gasket so that the projection is where
shown in the illustration.
Caution
Poor idling etc. may result if the throttle body gasket
is installed incorrectly.
( T U R B O )
(Refer to
A
7. Heater hose connection
8. Charge air
Gasket
10. Throttle body
11. Throttle body gasket
BODY GASKET INSTALLATION
17 Service.)
. .
cooler fitting
Engine
Engine
.