Mitsubishi Eclipse 1990 Service Manual page 645

FIXED SAS ADJUSTMENT
NOTE
1. The fixed SAS should not be moved unnecessarily;
it has been precisely adjusted by the manufacturer.
2 . If the adjustment is disturbed for any reason, readjust
as follows.
1. Loosen the tension of the accelerator cable sufficiently.
2. Back out the fixed SAS lock nut.
3. Turn the fixed SAS counterclockwise until it is sufficiently
backed out, and fully close the throttle valve.
4. Turn the fixed SAS clockwise until the throttle lever is
touched (i.e., the point at which the throttle valve begins
to open).
From that point, turn the fixed SAS clockwise another
t u r n .
5. While holding the fixed SAS so that it doesn't move, tighten
the lock nut securely.
6. Adjust the tension of the accelerator cable.
7. Adjust the basic idle speed.
8. Adjust the closed throttle position switch and the throttle
position sensor. (Refer to