Mitsubishi Eclipse 1990 Service Manual page 230

ENGINE, OVERHAUL
TSB Revision
Fuel and Emission Control,,
INSTALLATION
(1) Apply a light coating of clean engine,, oil to the upper
O-ring.
(2) Install injector in cup on fuel
(3) Install retaining clip.
(4) Apply a light coating of clean engine oil to 'the -O-ring
on the nozzle end of each
Insert fuel injector nozzle into openings in
Seat the injectors in place.
screws.
(6) Connect fuel supply tube to fuel rail.
(7) Install throttle body and new gasket on intake manifold.
Tighten mounting bolts.
Connect purge hose nipple on throttle body.
Loosely install EGR valve with a
new gasket between EGR tube and
(lO)Finger tighten EGR tube fasteners.
(ll)Tighten EGR valve mounting screws to 22
EGR tube fasteners to 11
vacuum supply tube to solenoid.;
manifold.
rail
gasket. Install
(16
torque.