Mitsubishi Eclipse 1990 Service Manual page 302

Table of Contents

Advertisement

Water outlet fitting or
water inlet fitting
I
ENGINE
Cvlinder
(2) Apply specified sealant to the thermostat case assembly
in the places shown in the
Specified sealant:
(3) Apply a small amount of
inlet pipe, and then press the thermostat case assembly
into the water inlet pipe.
(4) Tighten the thermostat case assembly mounting, bolts.
(5) Tighten the water inlet pipe bolts.
HOSE CONNECTION
(1) Insert each hose as
outlet fitting or water inlet fitting.
(2) Align the mating marks on the radiator hose and hose
I
clamp, and then connect the radiator hose.
When connecting the high-pressure fuel hose to the fuel rail,
apply a small amount of clean engine oil to the hose union'
and then insert, being careful not to damage the O-ring.
Caution
Do not let engine oil get into the fuel rail.
TSB Revision
Head 'Gasket
MITSUBISHI GENUINE
lent
RADIATOR LOWER
FUEL
or
the O-ring of the water
UPPER
the projection
water

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents