Mitsubishi Eclipse 1990 Service Manual page 229

ENGINE OVERHAUL
Intake manifold
Retainer
FUEL AND EMISSION CONTROL PARTS
REMOVAL
(1) Remove screws attaching EGR tube to intake manifold.
(2) Remove EGR valve mounting screws. Remove EGR
valve and transducer.
(3) Disconnect purge hose from throttle. body.
(4) Remove throttle body mounting bolts. Remove throffle
body.
(5) Remove gaskets. Clean gasket
(6) Release fuel system pressure. Refer to Fuel.
Pressure Release procedure in this section..
(7) Remove fuel rail mounting screws. Access screws through
the space between the intake manifold plenum runners.
(8) Lift rail off of intake manifold. Cover the fuel injector
openings in the intake manifold.
Fuel
(9) Remove fuel injector retainer.
injector out of fuel rail. Replace fuel injector O-rings.
and
Fuel
I.