Mitsubishi Eclipse 1990 Service Manual page 188

Engine side
bracket
ENGINE
INSTALLATION SERVICE POINTS
Install the engine assembly while checking that the cables,
hoses, and harness connectors are not clamped.
(1) Place a garage jack against the engine oil pan with a
piece of wood in between, and install the engine mount
bracket while adjusting the position of the engine.
(2) Support the engine with the garage jack.
(3) Remove the chain block and support the engine assembly
with the special tool.
(4) Align the notches on the
Engine
bracket with the arrow
direction. Then install the
Notch
When connecting the high-pressure fuel hose to the fuel rail,
apply a small amount of clean engine oil to the hose union,
and then insert, being careful not to damage the O-ring.
Caution
Do not let the engine oil get into the fuel rail.
TSB Revision
Enaine
ENGINE ASSEMBLY INSTALLATION
ENGINE MOUNT BRACKET ASSEMBLY
INSTALLATION
HIGH-PRESSURE FUEL HOSE CONNECTION
the
facing shown