Mitsubishi Eclipse 1990 Service Manual page 668

Connect a hand vacuum pump to the nipple.
3.
4. Connect a battery to the solenoid valve and apply a vacu-
um to check air-tightness.
Battery voltage
Not applied
Applied
5. Measure the resistance between the terminals of the sole-
noid valve.
Standard value: 36-44
EVAPORATIVE EMISSION PURGE SOLENOID
CHECK
Refer to GROUP 17
EGR SOLENOID CHECK
Refer to GROUP 17 Emission control System.
(Turbo)>
Refer to GROUP 17
Engine>
WASTE GATE SOLENOID
Refer to GROUP 15 On-vehicle Service.
nipple Normal condition
Open Vacuum leaks
Closed Vacuum maintained
Open Vacuum maintained
[at
Emission Control System.
Emission Control System.
13100570152
Engine