Mitsubishi Eclipse 1990 Service Manual page 275

(22
Generator
pulley
Adjus
bolt
ENGINE On-vehicle Service
DRIVE BELT TENSION CHECK AND
A D J U S T M E N T
GENERATOR DRIVE BELT TENSION
Use the belt tension gauge to check belt tension
point or check deflection by applying
shown point.
Standard value:
Tension: 245
Deflection <Reference,
9.0
Water
pulley
GENERATOR DRIVE BELT TENSION
1. Loosen the nut of the generator pivot bolt.
2. Loosen the lock bolt.
3. Turn the adjusting bolt to adjust the belt tension or deflec-
tion to the standard value.
Standard value:
Items
Tension
Deflection
mm
<Reference
value>
4
Tighten the nut of the generator pivot bolt.
Tightening torque: 23 Nm (17
5. Tighten the lock bolt.
Tightening torque: 23 Nm (17
6. Tighten the adjusting bolt.
Tightening torque: 10 Nm (7
TSB Revision
490 (55.1
11.5 mm
belt is
the shown
(22 to the
,
110.2
ADJUSTMENT
belt is
392
(88.2)
10.0