Mitsubishi Eclipse 1990 Service Manual page 187

ENGINE
compressor from the compressor bracket with the
attached.
NOTE
Place the removed A/C compressor in a place where it will
not be a hindrance when removing and installing the engine
assembly, and tie it with a cord.
Caution
Do not bend the joint between the A/C hose and the A/C
pipe by force.
(1) Support the engine with a garage jack.
(2) Remove the special tool which was attached when the'
transaxle assembly was removed.
(3) Hold the engine assembly with a chain block or similar
(4)
piece of wood in between, jack up 'the engine so that
the weight of the engine is no longer being applied to
the engine mount bracket, and then remove the engine
mount bracket.
After checking that all cables, hoses and harness connectors,
etc., are
slowly to remove the engine assembly upward from the engine
compartment.
TSB Revision
Engine
A/C COMPRESSOR REMOVAL
the A/C compressor connector and remove
M O U N T B R A C K E T
REMOVAL
a garage jack against the engine oil pan with a
ENGINE ASSEMBLY REMOVAL
. . .
the engine, lift the chain block
the