Mitsubishi Eclipse 1990 Service Manual page 193

Camshaft and
ENGINE
EXHAUST CAMSHAFT
CAMSHAFT
Use the special tool to the camshaft turning, and
then install the intake camshaft, sprockets.
CYLINDER HEAD COVER INSTALLATION
6 7
Install the cylinder head cover assembly to the head and
tighten fasteners in sequence shown in figure. Tighten all
fasteners according to the torque method.
(1) Tighten to 4.5 Nm (3.3
(2) Tighten to 9.0 Nm (6.6
(3) Tighten to 12 Nm (6.9
a
TSB Revision