ENGINE OVERHAUL
Valve retaining locks
Cylinder
INSTALLATION
(1) Coat valve stems with clean engine oil and
in cylinder head:
(2) If valves or seats have been reground,!
height (A).
Make sure of measurements from cylinder head
to the top of valve stem.
(3) Install valve seal/spring seat assembly over valve guides
on all valve stems. Ensure
around the top of the rubber seal. Install valve springs,
valve retainers.
(4) Compress valve springs with a valve spring compressor.
Install locks and release tool.
(5) Before installing the bolts, the threads should be oiled
with clean engine oil.
Revision
and Valve
valve tip
garter
intact