Mitsubishi Eclipse 1990 Service Manual page 724

0
INTAKE AND EXHAUST
Intake Manifold
INSPECTION
Check the following points; replace the part if a problem is
found.
INTAKE MANIFOLD CHECK
1. Check for damage or cracking of any part.
Check for
outlet port, and for obstruction of the water passage or
gas passage.
3.
Using a straight edge and a feeler gauge, check for distor-
tion of the cylinder head installation surface.
Standard
0.2 mm
TSB Revision
. . .
of the negative pressure (vacuum)
mm
in.)
15100310123
in.) or less
,
.
.