Mitsubishi Eclipse 1990 Service Manual page 721

INTAKE AND EXHAUST
REMOVAL AND INSTALLATION
Operation
Residual Fuel Pressure Releasing
(Refer to GROUP
Engine Coolant Draining
(Refer to GROUP
Reservoir Assembly Removal
with Auto-Cruise
steps
Removal
1. Air intake hose
2. Breather hose
3. Accelerator cable connection
4. Clip
5. MAP sensor connector
6. Charge temperature sensor connector
7. Vacuum hose connection
8. TPS connector
9. motor connector
Intake Manifold
Service.)
Service.)
2.9
3.9
2 . 9
TSB Revision
Engine
Post-installation Operation
Reservoir Assembly Installation
<Vehicles with Auto-Cruise System>
Engine Coolant Supplying
(Refer to GROUP
Accelerator Cable Adjustment
(Refer to GROUP 17
O-ring
Engine oil
10. wiring harness
11.
12. PCV hose assembly
13. Vacuum hose connection
14. Brake booster
connection
15. pipe connection
16.
Service.)
On-vehicle Service.)
connection
hose
fuel hose connection