Mitsubishi Eclipse 1990 Service Manual page 815

Engine (Turbo)>
Engine (Turbo)>
Engine>
EVAPORATIVE EMISSION PURGE --SOLENOID
CHECK
NOTE
When disconnecting the vacuum hose, place an
mark on it
1. Disconnect the vacuum hose from the
2. Disconnect the harness connector.
3. Connect a hand vacuum pump to nipple (A) of the solenoid'
valve (refer to the
4. Check air-tightness by applying a vacuum with voltage
applied directly from the battery to the purge control sole-
noid. valve.
Battery voltage
Applied
Not applied
5. Measure the resistance between the terminals of the
solenoid valve.
Standard value: 36-44
TSB Revision
proper reconnection.
at left).
Vacuum leaks
Vacuum
,
.
[at
.
valve.