11
E N G I N E
INSPECTION
CRANKSHAFT MAIN JOURNALS
The crankshaft journals should be checked for excessive
wear, taper and scoring. Limits of taper or
on any crankshaft journals should be held. to
in.). Journal grinding should not exceed 0.305 mm
in.) under the standard
grind thrust faces of
nick crank pin or journal fillets. After grinding, remove
rough edges from crankshaft oil holes and clean out all
passages.
Caution
With the nodular cast iron
tant that the final paper or
regrind be in the same direction as normal rotation'
in the engine.
TSB Revision
. .
mm.
Do NOT
3
journal. Do NOT
,
.
journal