Mitsubishi Eclipse 1990 Service Manual page 192

ENGINE
554
TSB Revision
Camshaft and
INTAKE CAMSHAFT SPROCKET/EXHAUST
CAMSHAFT
Use the special tool not to let the. camshaft sprockets
CAMSHAFT BEARING
Loosen the camshaft bearing cap attaching fasteners in
sequence shown in the figure (one
INTAKE CAMSHAFT/EXHAUST CAMSHAFT
REMOVAL
Identify the camshafts before removing from the head. The
camshafts are not interchangeable.
INSTALLATION SERVICE POINTS
CAMSHAFT OIL SEAL
(1) a piece of wood between a garage jack and the
pan, and jack up the engine to set the special .
engine oil
(2) Install the camshaft seal into the cylinder head using'
the special tool until it is flush with the head.
CAMSHAFT BEARING CAP INSTALLATION
Install the camshaft bearing caps in the
illustration.
.
at a time).
shown in the