controller show automatic_failover
To display the automatic failover status (enabled or disabled) for the
specified controller, use the controller show
automatic_failover command.
Syntax
controller show automatic_failover
Examples
The following example shows that the controller's automatic
failover is currently off (disabled):
AAC0> controller show automatic_failover
Executing: controller show automatic_failover
Automatic failover DISABLED
Related Information
array commands:
array set failover
array set global_failover
controller commands:
controller set automatic_failover
controller Commands
(page
5-100)
(page
5-102)
(page
6-18)
6-22