Adaptec RAID 2810SA Software Reference Manual page 97

The Stripe Size Column
This column displays the stripe size for the array. You specify the
stripe size when using the container create mstripe,
container create raid5, and container create stripe
commands.
The Usage Column
This column displays information about the data on or the status of
the array. Specifically, the column can display the items listed in
Table 5-2.
Table 5-2. Container Usage Items
Item Meaning
The FAT file system resides on this array.
FAT
A file system resides on a multi-partition array. A
MultPart
multi-partition array is an array that has multiple
operating system or DOS partitions.
The array resides in a NetWare environment.
NetWare
No file system resides on this array.
None
The NTFS file system resides on this array.
NTFS
For UNIX, there is a mounted file system on this array.
Open
The array is a phantom array or the array is offline.
UnCfged
An unknown file system resides on this array.
Unknown
For UNIX, the operating system recognized this array,
and there has not been a query (e.g., mount, fdsk,
read, write) on the array.
The array is unusable and cannot be mounted.
UnMap'd
The UNIX operating system recognized this array, and
Valid
there has been a query (e.g., mount, fdsk, read, write)
on the array.
The Scsi :ID:L Column
C
This column displays the SCSI channel number, the SCSI ID, and the
SCSI logical unit number for the SCSI disk or disks on which the
array was created.
container Commands
5-58