Disk Show Space - Adaptec RAID 2810SA Software Reference Manual

disk show space

To display space usage information on a SCSI disk, use the disk
show space command.
Syntax
disk show space [/all{=boolean}] [{scsi_device}]
Parameters
{scsi_device}
Specifies the ID for the device for which you want to display
space usage information. A SCSI ID consists of a SCSI channel
number (for example, 0, 1, 2, 3, etc.), a device ID (0 through 15
inclusive), and a device logical unit number (0 through 7
inclusive). See the scsi_device section on page 3-7 for more
information on how to specify the SCSI device.
Switches
/all{=boolean}
Specifies whether to show space usage information for all SCSI
disks on the currently opened controller. If you set this switch
to TRUE, the command shows space usage information for all
SCSI disks on the currently opened controller.
This switch defaults to FALSE if you specify the scsi_device
parameter; otherwise, the switch defaults to TRUE.
Examples
The following example shows space usage information for all of the
SCSI disks on the currently opened controller:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage
----------- ---------
0:02:0 Array
0:02:0 Free
0:03:0 Free
0:04:0 Free
0:05:0 Free
Size
-------------
64.0KB: 20.0MB
20.0MB: 29.0MB
64.0KB: 49.0MB
64.0KB: 49.0MB
64.0KB: 49.0MB
disk Commands
7-23