Related Information; Examples - Adaptec RAID 2810SA Software Reference Manual

Executing: container list
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 15.0MB
The following example assigns the label Tigris to array 0:
AAC0>container set label 0 Tigris
Executing: container set label 0 "Tigris"
Use the container list command after using the container
set label command to display the new label, as in the following
example:
AAC0>container list
Executing: container list
Num Total Oth Stripe
Dr Label Type Size Ctr Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 15.0MB
Tigris
As the example shows, the new label Tigris now appears in the
Num Label column.

Related Information

container commands:
container create mstripe
container create mvolume
container create raid5
container create stripe
container create volume
container format
Scsi Partition
Usage C:ID:L Offset:Size
None 0:02:0 64.0KB:
Scsi Partition
Usage C:ID:L Offset:Size
None 0:02:0 64.0KB:
(page 5-14)
(page 5-19)
(page 5-24)
(page 5-30)
(page 5-35)
(page 5-54)
container Commands
15.0MB
15.0MB
5-108