disk list
To display a list of the disks available on the currently opened
controller, use the disk list command.
Syntax
disk list [/all{=boolean}] [/full{=boolean)]
[{scsi_device}]
Parameters
{scsi_device}
Specifies the ID for a specific device for which you want to
display information. A device consists of a SCSI channel
number (for example, 0, 1, 2, 3, etc.), device ID (0 through 15
inclusive), and device logical unit number (0 through 7
inclusive). See the scsi_device section on page 3-7 for more
information on how to specify the SCSI device.
Switches
/all{=boolean}
Specifies whether to display a list of all devices. If you set this
switch to TRUE, the command displays a list of all devices on
the controller.
This switch defaults to FALSE if you specify scsi_device.
Otherwise, the switch defaults to TRUE.
/full{=boolean}
Specifies whether to display detailed information. If you
specify TRUE, the command displays detailed information. If
you specify FALSE, the command does not display detailed
information.
This switch defaults to FALSE.
Examples
The following example shows how to display nondetailed
information for all of the SCSI disks on the currently opened
controller:
AAC0>disk list
disk Commands
7-5